Welcome to this Nespresso Assistance video on descaling your Lattissima+. In order to obtain a perfect cup of coffee, time after time, we recommend that you descale your LATISSIMA+ machine when the «Cappuccino» button shows a steady orange light. The Nespresso Club offers you a descaling kit that is specially designed for your Nespresso machine. You’ll see how simple it is to descale your machine. Turn on your machine. Before starting, remember to remove any capsules. Empty the capsule container, the drip tray and the water tank. Fill the water tank with approximately 500 mL of water and the Nespresso descaling solution. Open the entrance panel and attach the hot water nozzle. The «Cappuccino» button will flash in orange to indicate that the descaling mode is active. Put a container holding up to 1L under the coffee outlet and the steam nozzle. Press on the «Cappuccino» button to start. The descaling solution will flow through alternately from the coffee outlet and the hot water nozzle. Wait till only the «Cappuccino» button is flashing. Empty the drip tray and thoroughly rinse the water tank. Refill it with fresh water to the maximum level. Put the container in place again. Press the “Cappuccino” button. The “Cappuccino” and “Macchiato” buttons will flash alternately. The water flows from the hot water nozzle and then the coffee outlet. When the cycle is finished, the machine will stop. Detach and put away the descaling nozzle. Empty the drip tray. Wipe down the machine with a damp cloth. The descaling is finished. Your Lattissima+ machine is ready. You can now continue to enjoy our range of Grand Crus specifically designed to optimise the extraction quality of your machine, and guarantee the ultimate Nespresso coffee quality, cup after cup.