“Descaling” Descale the machine when the message “DESCALE” flashes on the display. Turn the coffee machine on. Press the MENU icon to enter the menu. Press the icon relative to one of the scrolling arrows ntil “Descale” is displayed. Press the OK icon, “Confirm?” is displayed. Press the OK icon to confirm. “EMPTY DRIP TRAY” is displayed, alternating with “REMOVE FILTER” (if the filter is present) and “Add descaler Press OK”. Empty the water tank completely and remove the water softener filter (if present). Empty the drip tray and grounds container, then put them back in the appliance. Pour the descaler into the tank up to level A (corresponding to a 100ml pack),. marked on the back of the tank,
then add water (1 litre) up to level B, and put the water tank back. Place an empty container with a minimum capacity of 1.5 litres under the hot water spout. Press the OK icon to confirm that you have added the solution. The descale programme automatically
performs a series of rinses and pauses, to remove limescale deposits from inside the machine. The message “Descale underway” is displayed. The descale programme starts
and the descaler liquid comes out of the water spout. Avoid contact with splashes of water. After about 30 minutes, the messages “RINSING” and “FILL TANK” alternate on the display. The appliance is now ready for rinsing through with clean water. Remove the water tank, empty, rinse under running water, fill with fresh water up to the MAX level
and put back in the appliance. The message “RINSING, Press OK” is displayed. Empty the container used to collect the descaler solution and replace it empty under the hot water spout. Press the OK icon to start rinsing. Hot water flows out of the spout and the message “RINSING, Please wait” is displayed. When the water tank is completely empty, the messages “RINSING”, “REPLACE FILTER” (if previously removed) and “FILL TANK” alternate on the display. Remove the water tank. Fill the tank up to the MAX level with fresh water. Replace the filter (if previously removed) and insert it in the appliance. The display will show “RINSING Press OK”. Empty the container used to collect the rinsing water and replace it, empty, under the hot water spout. Press the OK icon to restart rinsing. The message ”RINSING Please wait” appears on the display, Water is delivered from the hot water spout, and the rinsing cycle finishes when
water is delivered from the coffee spout. Do not leave the appliance unattended
while hot water is being delivered. When the water tank is completely empty,
the message “Rinsing Complete, Press OK” is displayed. Press the OK icon. The message “FILL TANK” appears on the display. When the tank is filled and replaced, the message “Heating please wait” appears on the display, after which the machine is ready to use. Please note: If the descaling cycle is not completed correctly (e.g. lack of electricity) we recommend repeating the cycle.