Welcome to this Nespresso assistance video on how to use your new Creatista machine. Before preparing your coffee and milk drinks, we suggest you follow some simple instructions. Fill the water tank with fresh potable water and turn the machine ON by pressing the START button. Place a cup under the coffee outlet. To accomodate a Latte Macchiato glass, push the cup support in until it locks. Rotate the SELECT dial to select your coffee and milk drink. Press the START button to start your preparation or press the SELECT dial to personalize the current settings of your Creatista machine. Rotate the SELECT dial again to adjust the coffee volume, Milk Temperature or Milk Texture. Press to enter and rotate to adjust the settings of your choice. Froth levels and coffee volumes suggested are marked with a dotted line. Press the SELECT dial to save & exit or press CANCEL to exit without saving. It is recommended to use the milk jug provided with the machine for an optimized performance. Fill the stainless steel milk jug with enough fresh cold milk. For optimal milk froth, use pasteurized whole or semi skimmed milk at refrigerated temperature. Minimum and maximum levels are marked on the inside and outside of the milk jug. Lift the steam wand and position in the center of the milk jug. Ensure the milk jug is making contact with the temperature sensor located in the drip tray. Lift the lever, insert your capsule and close the lever. Press the START button to extract your coffee. When the coffee extraction is complete, press START to begin milk frothing. When milk frothing is complete, remove the milk jug, lift the steam wand and wipe with a clean damp cloth. Allow steam wand to return to its down position and it will auto purge to rinse itself. Pour milk into the espresso to finish your drink. Thank you for watching and enjoy your new Nespresso Creatista machine.